Hardware · Genesis Edition
Built to be held.
64.5 × 112.9 × 10 mm. One black slab: the glass front and the matte PA12 shell read as a single surface. One wheel, two keys, one light. Explore the real enclosure CAD below.
Explore
Every edge, labelled.
Tap a feature to fly the camera to it. Drag to rotate, pinch or scroll to zoom. The model is the Genesis CAD, not an illustration.
Controls
Exactly three.
Everything else is on the 4.0-inch glass, including the mic button — hold it to talk in a room, ask the AI or say an order, big enough to hold while you watch the price. Everything the keys do, touch can do too; the keys are just faster.
Thumb wheel
Top-right edge, knurled, set into the shell. Roll to move the focus, adjust a value or flip pages. Press for back; at the top level, the menu. Ø14.5 mm, rim 0.75 mm proud of the wall.
Trade key
Right edge, centred on the wall. Open / enter: opens the focused item, and on a confirmation sheet it signs. Sits 1.3 mm proud so your finger finds it without looking.
Power key
Left edge, centred on the wall. Short press: screen off or on, still listening. Hold two seconds: slide to power off.
Inside
One board.
Four layers.
ESP32-S3 with Wi-Fi and Bluetooth, an AXP2101 power manager, an ES8388 audio codec for the room, and every part on one side so the glass sits flat on the other. Six gold pogo pins on the back for the 4G clip. The schematic goes public during the pre-order; you can check every net yourself.
- 4-layer FR-4, 0.8 mm, gold finish
- 98 machine-placed parts, all on one side
- 6 spring pins for the back-clip
Status light
One nub. Seven meanings.
The small nub on the top edge is an RGB light. You can read the device from across the table.
Layout
Edge map.
Status light
The RGB status light, glowing through a translucent antenna nub.
Wheel · Trade · USB-C
Thumb wheel at the top, trade key level with the power key, USB-C low on the same edge.
Power
Power key, nothing else.
Camera · Contacts · Audio
QR camera for Wi-Fi setup and account linking, six gold contacts for the 4G back-clip, speaker grille, mic hole.
Spec sheet
Numbers.
Genesis Edition hardware. Battery and weight figures are targets until certification units are measured.
| Dimensions | 64.5 × 112.9 × 10 mm |
|---|---|
| Weight | ≈ 110 g (target) |
| Display | 4.0" · 320 × 480 IPS · capacitive touch · glass front flush with the shell |
| Processor & radio | ESP32-S3 · Wi-Fi 2.4 GHz · Bluetooth LE 5 |
| Controls | Knurled thumb wheel (roll + press) · Trade key · Power key · on-screen mic button (rooms, AI, voice shortcuts) |
| Status light | RGB nub on the top edge (legend above) |
| Camera | Rear camera for QR: Wi-Fi setup, account linking |
| Audio | Speaker · MEMS microphone |
| Port | USB-C — charging and signed firmware updates |
| Battery | 1000 mAh · ≈ 3 h talk · 1 day standby (target) |
| Accessory contacts | 6 gold contacts on the back for the magnetic 4G back-clip (coming soon, sold separately) |
| Shell | PA12 nylon, 3D printed, matte black (Genesis Edition) |
| Security | Holds revocable trade-only keys, never funds · secure boot · encrypted flash · signed firmware, no downgrade · open-source firmware and schematic |
| Certification | FCC, CE, UKCA, TELEC, IMDA in progress · ships after certification |
| In the box | Device · USB-C cable |